sensors

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
sensors [2025/01/28 13:14] – nikolalsensors [2025/01/28 13:14] (current) – [Sensors] nikolal
Line 12: Line 12:
 detections after a mission has been performed. detections after a mission has been performed.
  
-Power is supplied through the same cable as the RS-485 uses, but in a separate lead. It accepts a DC voltage of 5-12V, so 5V is used in the Otter because it was available and unused by the other components. Battery power is also possible, +Power is supplied through the same cable as the RS-485 uses, but in a separate lead. It accepts a DC voltage of 5-12V, so 5V is used in the Otter because it was available and unused by the other components.
-but not used in the Otter project. +
 ===== Making custom IMC messages ===== ===== Making custom IMC messages =====
   * [[http://uavlab.itk.ntnu.no/wiki/doku.php?id=software:imc|IMC wiki uavlab]](Needs NTNU VPN login)   * [[http://uavlab.itk.ntnu.no/wiki/doku.php?id=software:imc|IMC wiki uavlab]](Needs NTNU VPN login)
  • sensors.txt
  • Last modified: 2025/01/28 13:14
  • by nikolal